Research over many decades has proven that absorption trenches and beds fail through progressive clogging and septic buildup. The problem is caused by incremental flows which causes localised ground saturation.
The Drainwave captures effluent as it leaves the septic, and utilises a tipping bucket and an internal double wave action to release batch doses of waste water into the pipes leading to the dispersion pipe network. This releases 9.5 litres of waste water over a 5 second interval. This is sufficient to evenly distribute waste water through either a 90 or 110 diameter pipe with 8mm drilled holes at 500mm centres.
Previously only pumping or siphon methods were available to overcome localised ground saturation. Both have inherent problems including, maintenance, cost, installation complexity, ground heave disturbance of levels and siphon head heights. The Drainwave provides a low cost, low maintenance solution, which delivers an extremely even measured dose to the whole pipe absorption network.
The Drainwave™ is protected internationally under "International Patent Application PCT/AU2007/001838"
™ 2009 - Ducane Australia.
Distributed in the UK and Ireland by KONSERVE Limited.
Company No. 7094508 - Registered in England & Wales - The Garden House, Castle Bromwich Hall Estate, Solihull, B36 9DE Website designed by It's a Design Thing
